Armstrong suspended ceiling tiles are an integral part of the suspended structure, determining its functionality and appearance. Π’Π°ΠΊΠΈΠ΅ ΠΌΠ°ΡΠ΅ΡΠΈΠ°Π»Ρ ΠΏΡΠΎΠΈΠ·Π²ΠΎΠ΄ΡΡΡΡ ΠΈΠ· ΠΏΠ»Π°ΡΡΠΈΠΊΠ° ΠΈ Π°Π»ΡΠΌΠΈΠ½ΠΈΡ. There are also metal and PVC panels. Their main properties are fire safety, moisture resistance, good heat and sound insulation. The installation of Armstrong suspended ceiling is not complicated and can be done with your own hands.
How to install a suspended ceiling type Armstrong we will consider below.
Armstrong suspended ceiling installation diagram
Installing Armstrong suspended ceiling consists of several steps, the essence of which is:
- Quality marking, when the height of all communications is taken into account and marks are made all around the perimeter of the room.
- Placement of corner profiles. They are installed horizontally around the entire perimeter of the room. Fixing to the walls is carried out using self-tapping screws, anchors, etc.
- Placement of support rails (3.7m) parallel to the walls or at an angle to them.
- Installation of spring hangers, which is carried out along with the installation of the support rails. They are attached to the ceiling slab on one side and connected to the support rails on the other.
- Install 1.2m laths, which are placed perpendicular to the supporting laths.
- Installation of 0.6m laths, which are placed parallel to the supporting laths and perpendicular to the laths in 1.2m.
- Placement of Armstrong ceiling luminaires after the battens have been installed, i.e. when the ceiling grid has been fully completed. For offices and stores, the luminaires are placed at the rate of one element per 0.5 mΒ² of ceiling. For other rooms, it is possible to install one unit per 2 or 2.5 mΒ² of ceiling.
- Laying ceiling tiles, 600x600mm, which is the final step in the assembly of the suspended structure.
Installation of Armstrong suspended ceiling is a job that can be accomplished by yourself without the help of professionals. The main thing is to familiarize yourself with the features and installation scheme, as well as clearly follow the proposed instructions. You can choose all the materials you need on Brilliant’s Instagram page, where only the highest quality products are offered.
Armstrong suspended ceiling installation technology
Installation of Armstrong ceiling is carried out using special hangers, which have a simple design and are of several types:
- Wire hangers, which can be made by yourself using ordinary wire. However, such hangers are not reliable enough.
- Straight rigid, the basis of which is a metal corner (one part of it is fixed on the ceiling, the other – on the frame). This design has restrictions on the length of the corner.
- Single adjustable, consisting of a movable bar and an adjustment bar. Here the height of the frame can be easily changed, but only within a small range.
- Double adjustable, which resembles the previous suspension model. There are two rods, so you can change the length of the suspension in a larger range.
- Threaded, represented by a rigid rod with threads applied to it. This type of hanger is capable of withstanding significant loads.
- Rigid elements with adjustment. Here you can change the suspension height by moving the fixing brackets.
Armstrong suspended ceiling, in particular its installation, is not very difficult. However, it is necessary to work carefully with the profile, and it is important to adhere to the installation technology and follow the recommendations of experts.