Today PVC panels are popular and in demand finishing materials. And all thanks to their practicality, moisture resistance, durability, a variety of textures, sizes and colors. There are no problems with installation, when all the work can be done independently, without professional help. It is enough to familiarize yourself with the recommendations on how to glue PVC panels on the walls, as well as to study the technology of fastening materials. With budget repair – this is the most favorable solution, when it will be possible not only to save money, but also to carry out all the work in the shortest possible time.
Preparatory work
Before gluing PVC panels on the walls, it is worth getting rid of old wallpaper, closing all cracks, cleaning the surface from dust and dirt, for which priming mixtures, special antifungal and detergents (for degreasing) can be used. There is no need to achieve a perfectly flat wall, when only too noticeable defects (more than 5mm) are leveled. Such preparation will guarantee good adhesion of the adhesive to the substrate.
If it is planned to mount PVC sheet panels on a plastered surface, it is necessary to prime it with any primer (preferably deep penetration). Gluing can be carried out directly on the walls or on a special wooden batten.
As for the tools you need, you need to acquire before you glue PVC wall panels:
- power drill,
- screwdriver,
- tape measure,
- hacksaw,
- construction level,
- pencil (marker),
- hammer,
- stapler,
- stepladder.
Step-by-step instructions for gluing PVC panels on the walls
Facing the walls in the rooms with PVC panels is made using different adhesives. Some masters prefer hot glue or liquid nails, others fix building materials using clamps, self-tapping screws or staples.
Having chosen a suitable method of fastening, as well as familiarizing yourself with how to properly glue PVC panels, you can proceed to the gluing itself.
It is desirable to start gluing plastic PVC panels from the upper edge of the wall. For an even gluing, a horizontal marking is made on the surface according to the level.
Brief instructions on how to glue PVC panels on the wall:
- To begin with, the hardware in the form of corners (internal and external) is installed. If the panels reach the ceiling, a special ceiling skirting board is used, which is screwed to the top bar. The final element is a molding with lamellae.
- Next, it is necessary to place the first panel into the starter strip. Fixing is carried out using self-tapping screws.
- The edges of the panel have grooves (holes) where each subsequent piece fits.
- If it is necessary to reduce the width of the panels, cut off all excess along the paneling with a knife.
On a clean, level surface PVC panel (how to glue, you can see on the site) is fixed with liquid nails. If the purlin is involved, then, first, fix the lath, and then assemble and fix the panels.
Understand and understand how to fix PVC panels on the glue, video instruction will help. And you can check out the range of PVC materials on Brilliant’s Instagram page.
The installation process of PVC panels does not take a lot of free time and does not require excessive effort. In addition, such materials are easy and simple to care for in the future. It is enough to follow the manufacturer’s recommendations or familiarize yourself with useful advice from professionals.